Design & Reuse
Catalog of SIP Cores
System on Chip design resources
arrow A/D Converter (ADC) (530)
arrow Amplifier (107)
arrow Analog Comparator (18)
arrow Analog Filter (28)
arrow Analog Front Ends (37)
arrow Analog Multiplexer (2)
arrow Analog Subsystems (5)
arrow Clock Synthesizer (98)
arrow D/A Converter (DAC) (219)
arrow DC-DC Converter (95)
arrow DLL (744)
arrow Oscillator (344)
arrow Oversampling Modulator (8)
arrow PLL (1746)
arrow Power Management (945)
arrow RF Modules (106)
arrow Sensor (59)
arrow Sensors and Monitors (103)
arrow Temperature Sensor (135)
arrow Other (267)
945 IP
551
0.0
1 mA LDO voltage regulator (output voltage 0.4V…0.9V)
040TSMC_LDO_01 is a low drop out voltage regulator designed to supply integrated circuits with stable and precise voltage. The LDO receives the input ...
552
0.0
5 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
055TSMC_LDO_01 is a low drop out voltage regulator designed to supply integrated circuits with stable and precise voltage. The LDO inputs voltage VDD_...
553
0.0
2 mA LDO voltage regulator (output voltage 1.2 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider. Differential amplifier compares reference voltage ...
554
0.0
6 mA Unity Gain Buffer with 6.5 MHz Gain Bandwidth
TS_VBUFF_6mA_X8 is a unity gain buffer which has a DC gain of 110dB and a unity gain bandwidth of 6.5MHz. It can source a current up to 6.5mA and sin...
555
0.0
5-60V Input Buck Regulator (Type-C EPR compatible)
The OT1152 is an 80mA CMOS buck regulator designed for use with high input voltages and logic level output voltages.. This implementation takes a 4...
556
0.0
1.12V/10uA, 20uA, 30uA, 50uA, 100uA Reference current and voltage source with temperature sensor
065TSMC_RS_03 is a reference current and voltage source (RS), used to supply analog blocks. It is based on bandgap reference voltage source, forming t...
557
0.0
1.16 V Bandgap voltage reference
180TSMC_BVR_01 a bandgap voltage reference produces temperature independent voltage level around 1.16V (at Bangap_Vref pin) using temperature dependen...
558
0.0
1.17 V Reference current and voltage source
Reference current and voltage source is used to supply any analog blocks. It is based on the reference voltage source forming temperature compensation...
559
0.0
1.18 V/ 1.02...5.1 uA Reference current and voltage source
Reference current and voltage source is used to supply any analog blocks. It is based on the reference voltage source forming temperature compensation...
560
0.0
1.19 V Reference voltage source
Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...
561
0.0
1.19 V Reference voltage source
Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...
562
0.0
1.2 V Bandgap voltage reference
Bandgap voltage reference forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of temp...
563
0.0
1.2 V Bandgap voltage reference
Bandgap voltage reference forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of temp...
564
0.0
1.22 V Reference voltage source
Reference voltage source forms temperature-compensated voltage level equal to the width of the band gap of silicon due to mutual compensation of tempe...
565
0.0
1.22V/1uA Reference voltage and current source
180XFAB_RS_01 consists of a bandgap reference voltage regulator, formed temperature and power supply variations independent voltage and bias, formed r...
566
0.0
4.25V...15V to 3.3V/120mA LDO
4.25V...15V to 3.3V/120mA LDO...
567
0.0
1.2V->0.8V Low/Ultra-low Power LDO Comparator IP Core
A 1.2V->0.8V Low/Ultra-low Power LDO Comparator (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts...
568
0.0
4.2V->3.3V Low/Ultra-low Power LDO IP Core
A 4.2V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 4.2-volt in...
569
0.0
3.3V - >1.2V/1.1V/0.9V Low Power Cap-less LDO IP Core
A 3.3V - >1.2V/1.1V/0.9V Low Power Cap-less LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.9 volts...
570
0.0
3.3V ->1.1V/0.9V Cap-less LDO IP Core
A 3.3V -> 1.1V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.1 volts from a 3.3-volt in...
571
0.0
3.3V to 2.5V 50mA LDO voltage regulator
028SAM_LDO_05 is external-capacitor-based Linear Regulator in Samsung 28 LPP to generate SoC voltage supply voltage. The block provided with stable an...
572
0.0
3.3V- >1.2/1.1V/0.9V Ultra-low Power LDO IP Core
A 3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts ...
573
0.0
3.3V->1.1V/0.9V/0.8V Low/Ultra-low Power LDO IP Core
A 3.3V -> 1.1V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.1 volts from a 3.3-volt in...
574
0.0
3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO IP Core
A 3.3V->1.2V/1.0V/0.8V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts ...
575
0.0
3.3V->1.5V Cap-less LDO IP Core
A 3.3V->1.5V Cap-less LDO LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 3.3-volt i...
576
0.0
3.3V->1.5V Low Power LDO IP Core
A 3.3V->1.5V Low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.5 volts from a 3.3-volt inpu...
577
0.0
3.3V->1.8V/1.2V Low/Ultra-low Power LDO IP Core
A 3.3V->1.8V/1.2V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.2 volts from ...
578
0.0
3.3V->2.5V Low/Ultra-low Power LDO IP Core
A 3.3V->2.5V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.5 volts from a 3.3...
579
0.0
0.4V/250nA Bandgap voltage and current sources
055GF_BVR_01 the bandgap voltage reference generates temperature-compensated voltage due to mutual compensation of temperature dependence of bipolar d...
580
0.0
0.6 V Bandgap voltage reference
Bandgap voltage reference forms temperature-compensated voltage level due to mutual compensation of temperature dependence of bipolar diodes and resis...
581
0.0
0.6V/10, 20uA Reference voltage and current source
055TSMC_RS_02 consists of bandgap voltage reference and two voltage-to-current converters: one of them is based on external resistor and thus could be...
582
0.0
0.6V/10u, 20uA, 100nA, 200nA Reference voltage and current source
055TSMC_RS_05 is a reference voltage and current source that consists of bandgap voltage reference, two voltage-to-current converters and current-volt...
583
0.0
0.6V/10uA, 20uA Bandgap and V2I converter (Voltage to current)
55TSMC_BGV_02 is a reference voltage and current source that consists of bandgap voltage reference, voltage-to-current converter and current-voltage b...
584
0.0
1.8V->0.8V Low Power LDO IP Core
A 1.8V -> 0.8V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 0.8 volts from a 1.8-volt in...
585
0.0
1.8V->1.2V Low/Ultra-low Power LDO IP Core
A 1.8V->1.2V Low/Ultra-low Power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.2 volts from a 1.8...
586
0.0
30 mA flash LDO voltage regulator (output voltage 1.8 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider. Differential amplifier compares reference voltage ...
587
0.0
40 mA LDO voltage regulator (3.3/5.0V to 1.8V)
180TSMC_LDO_20 is LDO to convert IO voltage 3.0V÷5.5V to 1.8V and designed to supply integrated circuits with stable and precise voltage with load up ...
588
0.0
30 mA LDO voltage regulator (output voltage 0.9 to 1.3 V)
055GF_LDOVR_03 the voltage regulator is used to maintain a stable output voltage at varying input voltage. The block consists of a differential amplif...
589
0.0
20 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
055TSMC_LDO_09 IP is cap-based LDO voltage regulator designed to convert IO voltage 2.5V to 1.2V and supply analogy circuits with load up to 20mA. The...
590
0.0
10 mA LDO voltage regulator (output voltage 1.1V/1.2V/1.3V/1.4V)
055TSMC_LDO_02 is a low drop out voltage regulator designed to supply integrated circuits with stable and precise voltage. The LDO inputs voltage VDD...
591
0.0
20 mA LDO voltage regulator (output voltage 2.7 V)
350AMS_LDOVR_01 the voltage regulator consists of differential amplifier which compares reference voltage 1.13V with voltage from feedback divider. It...
592
0.0
30 mA linear voltage regulator
The voltage regulator is CMOS low dropout linear voltage regulator with 30 mA output current capability. The device have high output voltage accuracy,...
593
0.0
300 μA Unity Gain Buffer with 5.5 MHz Gain Bandwidth
TS_VBUFF_300uA_X8 is a unity gain buffer which has a unity gain bandwidth of 5.5MHz while driving a 2pF capacitance. It can drive a current up to ±3...
594
0.0
600mV Sub-BG Voltage Reference
600mV Sub-BG Voltage reference, Vdd=1V, Idd=80uA...
595
0.0
100nA Ultra-low Power LDO in 110nm~12nm
The LDO IP supports various input voltage ranges include 1.90V~3.60V, 1.90V~5.50V and so on. The typical output voltage of this LDO can be configratio...
596
0.0
50mA 1.8V Voltage Regulator
The TS_VR_1V8_X8 is a 1.8V linear voltage regulator (LDO) designed to supply the digital core of an ASIC. The LDO operates with an input voltage of 3....
597
0.0
10mA 10Ghz BW Capless
A 10mA 10GHz BW capless LDO (Low Drop-Out) is a type of voltage regulator that is designed to provide a stable output voltage with a low voltage drop ...
598
0.0
20mA 10Ghz BW capless
20mA 10GHz BW capless IP core is a digital circuit block that provides a capless Low Drop-Out (LDO) voltage regulator function. It is designed to be i...
599
0.0
30mA 2-channel LDO voltage regulator (output voltage each channel 1.0V)
028SAM_LDO_04 is external-capacitor-based Linear Regulator in Samsung 28 FD-SOI to generate SoC voltage supply voltage. It contains two independently ...
600
0.0
10mA 3.3V Voltage Regulator
The TS_VR_3V3_X8 is a 3.3V low-dropout linear regulator (LDO) to supply the digital core of an analog ASIC. The LDO operates with an input voltage of ...